Support Knowledge Base


M-Audio Keystation Series - Setup with Ableton Live 9 Lite

m-audio keystation49 main angleThe M-Audio Keystation series controllers are simple, powerful MIDI controllers designed for sequencing music and playing virtual instruments on your Mac or PC.  This article walks through setting up your M-Audio Keystation for use with Ableton Live 9 Lite and the SONiVOX Eighty Eight Ensemble 2 virtual instrument.

 

Contents

  1. Downloading, Installing and Authorizing Ableton Live Lite
  2. Keystation Series Hardware Setup
  3. Ableton Live 9 Lite Software Setup
  4. Virtual Instruments and Plugins
  5. Additional Resources
  6. Further Technical Support

 

 

Downloading, Installing and Authorizing Ableton Live Lite

Before getting started with the setup, make sure that your copy of Ableton Live Lite has been fully installed and activated. Follow the guide below for a complete walkthrough:

 

Keystation Series Hardware Setup

The Keystation series controllers are defaulted to the Mackie Control protocol to allow for Transport control (Play, Stop, Record, Directional buttons).

To switch between Mackie Control and HUI:

    1. Press the ADVANCED button to put the Keystation into Edit Mode.

      m-audio keystation ableton hardware 1
       
    2. Press the key labeled MACKIE/HUI.

      Note: The "+" and "-" OCTAVE LEDs will be lit green when in Mackie mode and red when in HUI mode.

      m-audio keystation ableton hardware 2a     m-audio keystation ableton hardware 2b
       
    3. Press the ENTER key.
       

Back to Top

 

Ableton Live 9 Lite Software Setup
  1. First, connect the M-Audio Keystation series controller to an available USB port on your computer using the supplied cable, and launch Ableton Live 9 Lite.
     
  2. Next, open the Ableton Live 9 Lite Preferences window.  Choose your Audio Device in the Audio tab.  This will be dependent upon the audio interface that you are using.

    MAC:
    Select Live > Preferences
    or use the key command shortcut - [Command + comma]

    PC:
    Select Options > Preferences
    or use the key command shortcut - [Control + comma]

    m-audio keystation ableton 2
     
  3. Select the MIDI / Sync tab from the left side of the window. Within the MIDI Ports section, adjust the settings as suggested below:

    Next to Input: Keystation 49 (or 61, 88), toggle On the button in the Track, and Remote columns as shown in the image below.
    Next to Output: Keystation 49 (or 61, 88), toggle On the button in the Track, and Remote columns as shown in the image below.

    m-audio keystation ableton 3
     
  4. Next, at the top of the window under Control Surface, choose MackieControl from the drop-down list in row 1.  Under the Input column in Row 1, choose Keystation 49 (Port 2).

    m-audio keystation ableton 4a

    You can leave the third drop-down menu in Row 1 under Output set to None.
     

The Transport control (Play, Stop, and Record) on the Keystation series controller will now control and correspond with the Transport functions in Ableton.  In addition, the Directional buttons on the Keystation series controller will now 
 

Back to Top

 

Virtual Instruments and Plugins
 
Adjusting Ableton Live 9 Lite Plugin Sources

Note for Windows users only: If you have difficulty locating your plugin in your Plug-Ins category within Ableton Live 9 Lite, be sure Ableton Live 9 Lite is reading plugins from the correct location where your plugin is installed. To do this:

    1. Open the Preferences menu in Ableton Live 9 Lite

      MAC:
      Select Live > Preferences
      or use the key command shortcut - [Command + comma]

      PC:
      Select Options > Preferences
      or use the key command shortcut - [Control + comma]
       
    2. Choose the File Folder tab

      akai mpk2 ableton plugin tab
       
    3. Under the heading Plug-In Sources:
       
      • Toggle On the button next to Use VST Plug-In Custom Folder
      • Note the location under VST Plug-In Custom Folder.  

         
    4. If this location is not set correctly, next to VST Plug-In Custom Folder, choose Browse, browse to the correct folder, and press OK.

      akai mpk2 ableton plugin location
       
SONiVOX Eighty Eight Default Installation Locations:

Windows:
32-bit and 64-bit: C:\Program Files (x86)\SONiVOX\VstPlugins\ 

Mac:
(AU): Macintosh HD > Library > Audio > Plugins > Components
(VST): Macintosh HD > Library > Audio > Plugins > VST
 

Back to Top

 

SONiVOX EightyEight Ensemble 2
    1.  Within the Ableton Live 9 Lite Session View, under the Categories heading, choose Plug-Ins.

      akai mpk2 ableton 88 1
       
    2. In the right-hand column next to Categories, click-and-drag Eighty Eight 2 onto a MIDI track to load Eighty Eight Ensemble 2 into your Ableton Live 9 Lite session.

      akai mpk2 ableton 88 2a
       
    3. The Eighty Eight Ensemble 2 virtual instrument interface will now open.

      akai mpk2 ableton 88 3

Back to Top

 

Additional Resources

Back to Top

 

Further Product Support

Whether you are a customer or dealer, if you already own an M-Audio product, or if you just have pre-sales questions, the M-Audio technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

 





Search
Categories