Support Knowledge Base

M-Audio AIR 192|6 - Frequently Asked Questions


With the AIR 192|6, you can create 24-bit/192kHz studio-quality recordings with an intuitive and easy-to-use audio interface. The AIR 192|6 enables you to record up to 2 channels at once with its 2 dedicated XLR+1/4-inch balanced combo inputs, and 2 all-new 1/4-inch instrument inputs that have a specially designed gain and impedance stage to provide the most accurate representation of a guitar or bass plugged directly into the interface. 5-pin MIDI In and Out connections are included for connecting synths, sequencers and other external MIDI gear. This article walks through a number of frequently asked questions about the AIR 192|6.


Frequently Asked Questions


Does the AIR 192|6 include any software?

Yes! The AIR 192|6 includes the following software:

  • Pro Tools | First M-Audio Edition
  • Ableton Live Lite
  • 20 Avid Effects Plugins
  • Eleven Lite + 20 Effects
  • AIR Music Tech Creative Collection FX
  • AIR Music Tech Boom
  • AIR Music Tech DB-33
  • AIR Music Tech Vacuum
  • AIR Music Tech Xpand!2
  • AIR Music Tech Mini Grand
  • 2GB of samples from Touch Loops


How do I connect the AIR 192|6 to my computer?

The AIR 192|6 comes with a USB-C to USB-C cable as well as a USB-C to USB-A cable to ensure that it can connect to all available computer ports.


Do I need to use a power supply with the AIR 192|6?

No, the AIR 192|6 is fully powered over the USB serial bus. There is no additional power required just connect the interface to an available USB port on your computer!


Do I need a driver to use the AIR 192|6?

For Mac operating systems, the AIR 192|6 is class-compliant and does not require a driver.

For the Windows OS, the AIR 192|6 requires the installation of a driver to ensure the best possible performance. You can obtain the Windows driver from the M-Audio Knowledge Base.


What audio sample rates does the AIR 192|6 support?

The AIR 192|6 can process audio at the following resolutions:

  • 44.1 kHz
  • 48 kHz
  • 88.2 kHz
  • 96 kHz
  • 176.4 kHz
  • 192 kHz

The AIR’s Transparent Crystal Preamps and Ultra-Pristine D/A converters capture every nuance and subtlety of your performance for truly professional recordings and crystal-clear monitoring.


What types of devices can I connect to the combo XLR inputs?

The combo XLR inputs will accept microphones and line-level devices (synth, drum machine, mixer, etc.). Use standard XLR cables for all microphones and 1/4-inch TRS cables for all line-level instruments. Adjust the gain for each channel with the Input Gain knobs.

If you are using a microphone that requires phantom power to function, you can supply that power by toggling the Phantom Power Switch on the front panel. The additional 48V will be applied to both XLR Inputs 1/2. Phantom power is only sent through the XLR ports, not TRS, so be sure to connect your mic with an XLR cable.

If you are using a guitar or bass with an active pickup, you could use the line-level 1/4-inch inputs as an alternative to the Instrument Input.


What types of devices can I connect to the Instrument Inputs on the front of the AIR 192|6?

Connect guitars or bass guitars with passive pickups to the Instrument inputs. Use standard 1/4-inch TS cables to connect a guitar or bass guitar to these inputs. Adjust the gain for each channel with the 1/2 Input Gain knobs.

While these inputs can accept a signal from most active pickups, 1/4-inch Inputs 1/2 can also be used as a direct input for a bass or guitar with hotter active pickups.


What type of audio outputs does the AIR 192|6 have?

The Main Outputs can accept two balanced 1/4-inch TRS cables controlled by a large, solid-feeling metal rotary level knob. Additionally, there is a 1/4-inch Headphone Jack with separate level control for private listening. 


How can I tell if a 1/4-inch cable is balanced (TRS) or unbalanced (TS)?

Balanced 1/4-inch cables are referred to as TRS (tip-ring-sleeve). This is because a TRS cable has 2 signal conductors while a TS (tip-sleeve) cable only has one. You can quickly identify if your 1/4-inch cable is TRS or TS by looking at the physical jack. If you see 2 rings circling the connector then the cable is TRS. Here are some images for reference:

                          TS                                                                                 TRS


What does the USB/Direct knob do?

The USB/Direct knob adjusts the mix of the audio signal from the AIR's inputs (Direct) and the audio output of your computer (USB). This mix is monitored from the Main Outputs and Headphone Output.

This knob is useful when compensating for latency. If you are experiencing a delay between your input and output signal while recording, turn the knob toward the Direct position to increase the blend of unprocessed audio. When you are finished recording, return the knob to the USB position to monitor directly from your DAW.


How can I send MIDI data to and from my computer with the AIR 192|6?

Use a 5-pin MIDI DIN cable to connect your AIR and external MIDI devices. Select the AIR 192|6 in your DAW as a MIDI I/O device to send and receive MIDI data to outboard gear.


What are the minimum system requirements?

AIR 192|6:

  • Windows 7 (64 & 32-bit)
  • Mac OSX 10.8

Pro Tools | First: 

  • Windows 10
  • Mac OSX 10.12.6

Ableton Live Lite:

  • Windows 7 (SP1)
  • Mac OSX 10.11.6

AIR Music Technology Plugins:

  • Windows 7 (SP1)
  • Mac OSX 10.8.5


Further Technical Support

Whether you are a customer or dealer, if you already own an M-Audio product, or if you just have pre-sales questions, the M-Audio technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.